One Step Finishing Gel-Kote

One Step Finish Premium White Gel-Kote

  • The highest-quality, ISO NPG marine finish gel coat used to permanently repair or replace original, high-gloss finish.

  • Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat.

  • Non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness.

  • Evercoat Coloring Agents may be used to tint the material to desired color.

  • Can be reduced with Evercoat Acetone (10%) for sprayer applications.

  • Does NOT require Evercoat Mold Release (# 105685) to attain a fully cured surface.

Proper Catalyzation Ratio

  • One-Step Gel Kote™  uses MEKP Liquid Hardener

  • 1 Ounce of One Step requires 12 drops of MEKP

  • Working time is approximately 15 minutes at 72° – 75°F (22° – 24°C)