Repair Planning

EVERCOAT Fiberglass Repair Products Small Hole Repair Process Repair Planning

Thickness Measurement

Measure the substrate to determine the repair thickness and repair bevel

3 measurements of 3.02, 3.48, and 3.83 show and avg. of 3.44mm

Repair Planning

Mark the perimeter of the repair
Bevel the repair out to the marked area

PROPER bevel

Mark the perimeter of the repair
Bevel the repair out to the marked area

Fiberglass Planning

Determine the sizes of the repair mat needed
Clean the repair area with acetone
Mask off the area to help keep the repair area confined

Tech Tip: 3.44mm average thickness divided by the avg thickness of mat (.75mm) equals 4.5 layers.

This repair will require 4 layers to allow room for filler and gel coat